Introduction
Stamping foil which is designed for CAD CUT purpose.
*For screenprinting application, please clieck here
Main features
Since this foil has a good elasticity, it can be used for special fabric(such as blue jeans, swimming suit, aerobic suits, sportswear, water-proof wears & etc.), artifical leather, knitwear & etc. Even it can be attached to wood or steel.
Additional features
1. Designed to be cut with a plotter or a laser cutting machine.
2. Do not need additional binder and only to transfer it directly on to fabrics using heat press
3. Excellent durability and washability
4. Can represent gold & silver, which are not in PU or PVC color range
5. Capable of very delicate design plotting
Transfer condition
Temperature : 140°C~160°C
Time : 7~8 seconds
How to use
1. Cut the film in reverse, at medium pressure
2. Weed the exceeding material
3. Place the material on the garment
4. Heat apply
5. Remove polyester backing film while it is a little warm
6. After then, press directly on the fabric once again to fix the design more tightly
Standard Dimension
500MM(Width) x 50M(Length) Per Roll
Share Stamping foil with binder in Social Media