ATEK-POLYPOXY
((Modified Polyurea/Epoxy For Rapid Repair Construction & Multiple primer ))
n Description
POLYPOXY is a two component fast curing, variety of thin-film coating and high adhesion propertie primer on steel & concrete .POLYPOXY is rapid repair of concrete for reinforced POLYUREA/EPOXY resin. Polypoxy’s low viscosity it quickly penetrates concrete & steel substrates, providing a highly durable. In addition sand, gravel, silica mixed with high intensity and after construction to represent you and is designed to enable low-temperature curing.
n Use
- For primer on steel & concrete.
- Reinforce concrete repair
- Concrete refacing coating
- Bridge deck repairs
- Floor crack repair
- Parking lot repairs
- Concrete roof & Balcony deck repairs
- Chemical resistance required floor
- Winter emergency maintenance·reinforcement
- Cold storage maintanance·reinforcement
n Features
- Rapid curing(20minutes by vehicle traffic can be highly conservative)
- High compression strength, abrasion resistance and excellent durability.
- Adhesion, heat resistance, cold resistance is good.
- Anti stainless, Chemical resistance, oxidation resistance
n Wet Properties
Appearance
Liquid
Specific Gravity(25?)
"A" 1.118
"B" 0.973
Viscosity(cps)
"A" 17.76
"B" 14.40
Thermal stability
0?~50?
Shelf life(10~40?)
(Sealed container)
6 Months
n Processing properties
Pot Life
2min
Tack Free Time(20?)
4min
Final Curing
20min
n Dry Properties
Tensile Strength ASTM D412
32 Mpa
Elongation (%)
6
Compressure Strength
Above 20Mpa
Hardness (Shore D)
Above 71
Bond Strength(Steel)
Above 8Mpa
Solids Contents
89%
Voc
2.3mg/l
Color
Ivory
n Application
- Mixing ratio for components A and B is 1:1.
- Refer to SSPC for preparing the surface.
- Be able to work at wide area with machine(Mixing ratio 1:1).
n Storage
Heating system should be installed in storage to prevent freezing during winter time. (Avoid long exposure under subzero temperatures.)
n Caution
- Should avoid from fire.
- In case of contact with skin and eyes, flush immediately with plenty of water and seek medical advise.
- Should use during working time.
n Packing
POLYPOXY is “A” “B” 20L PE pails or 200L steel drums.
Share POLYPOXY in Social Media