Other Manufacturing & Processing Machinery HomeProductsOther Manufacturing & Processing Machinery Inquiry Save to Favorites GO :::::Sort::::: Name Date Added Popular ↑ ↓ BV-305 BV-305 Suck back type. The big orifice is fit for dispensation of large capacity works. Operating type Suck-Back Maximum dose 28l/Min Viscosity range 1~200,000cps Operating air pressure 5kgf/cm² Maximum fluid charge pressure 50kgf/cm² Maximum number of cycles 150times/Min Air operating port PT1/4" Material of dosing part AL 6061 Material of driving part AL 6061 Weight 300g Two liquid Epoxy, Silicone,... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing equipment Made in Korea BST TYPE BST TYPE - PRESSURE TANK • Interior and upper size of the tank are identical which enables use of interior case. • Generally used for under 20 liter container Capacity H1 H2 OD ID D P.C.D Bolt Hole Size Internal container BST-1L 306 216 114 108 174 154 4.5" 3-120°Ø7 OptionMaterial : SUS,PE,Teflon,Teflon Coating BST-3L 326 236 140 134 200 180 5" BST-5L 366 266 165 159 225 205 6" BST-10L 416 316 216 210 276 256 8" BST-20L 566 416 255 249 315 295 ... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing equipment Made in Korea Static Mixer Specification ? Mixer Housing ? Mixer Element SMS- 6.4Ø x 16 SME- 6.4Ø x 16 SMS- 9.4Ø x 24 SME- 9.4Ø x 12 SMS- 9.4Ø x 30 SME- 12.5Ø x 12 SMS- 12.65Ø x 12 SME- 16Ø x 10 SMS- 12.65Ø x 30 SME- 16.4Ø x 10 SMS- 12.65Ø x... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea Static Mixer Made in Korea BX-2 BX-2 • No abrasion to tube, No pulsation while dispensing. • It has all functions like sucking liquids, Rotation/backlash, auto timer, etc. • Ideal for low-viscosity materials such as Instant adhesives, ink, etc. • Manual/Timer controls the shot size, easy to use. • Dispenses materials directly from the container of materials without using compressor air.... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing controller Made in Korea TAD-400SR TAD-400SR It realizes the highly precise spraying prevent forming the drop of liquids by setting the air blow and dispensing time on LCD Panel. • High quality with the functions ; minimal amount dispensation control, high -speed work, and automatic dispensation and automatic stop by the interval work. • Varied output functions facilitate automation and interface. • The digital timer displayed on LED in manual mode makes it easy to set time. • Memory the values for dispensing until you set the values again. • A blow function is built in to prevent liquid drip... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing controller Made in Korea TAD-200S TAD-200S High performance controller with our independently developed microprocessor. • High quality with the functions ; minimal amount dispensation control, high -speed work, and automatic dispensation and automatic stop by the interval work. • Vacuum control stops liquids from flowing after dispensation finishes. • Varied output functions facilitate automation and interface. • The digital timer displayed on LED in manual mode makes it easy to set time. • Memory the values for dispensing until you set the values again.... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing controller Made in Korea BV-505 BV-505 The valve only for spray. It controls spraying up to 2mm width at minimum. Operating type Needle Off Maximum dose 8l/Min Viscosity range 1~1,000cps Operating air pressure 5kgf/cm² Maximum fluid charge pressure 10kgf/cm² Maximum number of cycles 400times/Min Air operating port PT1/8" Material of dosing part SUS 303 Material of driving part SUS 303 Weight 285g Silicone, Bond, UV... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing euipment Made in Korea TAD-101SYSTEM TAD-101SYSTEM BANSEOK provides you with a wide range of fluid control applications by using air pressure. It uses the principal of inserting air into the liquid surface, to precisely control output by selecting time, pressure, needle size where the minimum level is 0.0001cc.... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing system Made in Korea BMT TYPE BMT TYPE - PRESSURE TANK • Hinge clamp type tank. Used by directly inserting the interior container • Suitable for large quantity and high pressured material. Capacity H1 H2 OD ID D P.C.D Bolt Hole Size Internal container BMT-5L 366 266 165 159 225 205 M10-4EA 3-120°Ø7 OptionMaterial : SUS,PE,Teflon,Teflon... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing equipment Made in Korea BV-520P BV-520P Mostly attached to FA line, and used with precision nozzle. The position settle faculty is very excellent, so easily use it with no extra position control even after replacing nozzle. (Precision nozzle type) Operating type Needle Off Maximum dose 0.8l / Min Visicosity range 1~50,000cps Operating air pressure 5kgf/cm² Maximum fluid charge pressure 10kgf/cm² Maximum number of cycles 400 times/Min Air operating port PT1/8" Material of dosing part SUS 303 Material of driving part SUS... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing equipment Made in Korea BFT type BFT type• It is easy to open and close the tank(clamp). With the inner and outer sides abraded, it is excellent in cleanness and endurance. • It is suitable for using when transporting low viscosity liquid by pneumatic pressure. Capacity H1 H2 OD ID D P.C.D Hole... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing equipment Made in Korea Barrel Heater Features Temperature control unit is combined with its barrel. It preheat the high viscous materials in barrel by heating from the barrel to the end of materials weak and get high... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea Barrel Heater Made in Korea BV-389 BV-389 High pressure valve of high discharge accuracy, capable to easily fine tune the discharge flow. < SPECIFICATIONS> Operating type Needle Off Maximum dose 28l / Min Viscosity range 1~1,000,000cps Operating air pressure 5kgf/cm² Maximum fluid charge pressure 210kgf/cm² Maximum number of cycles 150times/Min Air operating port PT1/4" Material of dosing part SUS 303 Material of driving part AL 6061 Weight 840g Grease, Silicone, Oil,... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing equipment Made in Korea BV-T520P BV-T520PCapable to continuously work on the two liquid type materials of minimum quantities, with no interference of pot life by discharging the respective primary agent & hardener simultaneously with mixing. (Precision nozzle type) <SPECIFICATIONS> Operating type Needle Off Maximum dose 0.8l/Min Viscosity range 1~10,000cps Operating air pressure 5kgf/cm² Maximum fluid charge pressure 10kgf/cm² Maximum number of cycles 400times/Min Air operating port PT1/8" Material of dosing part SUS 303 Material of... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing equipment Made in Korea TAD-103 SYSTEM TAD-103 SYSTEM BANSEOK provides you with a wide range of fluid control applications by using air pressure.Another variation of TAD-102 system. It removes liquid dripping due to remaining pressure after extraction. In case of low viscosity, using a valve is good to prevent the liquid dripping.... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea dispensing system Made in Korea Holder Set Specification Capacity/Model ? Holder ? Cap ? Plunger ? Cartridge 100cc(?) CH-100 CC-170 CP-170 CR-100 170cc(?) CH-170 CC-170 CP-170 CR-170 340cc(?) CH-340 CC-340 CP-340 CR-340 600cc(?) CH-650 CC-650 CP-650 CR-650 1,000cc(?) CH-950 CC-950 CP-950 CR-950 1.Cartridge Holder.The metal cover assists the cartridge and has a hole for you to see how much liquids remains in it. 2.Cartridge CapIt has screw to connect it to cartridge holder. / liquids after use. 3.Quick Connector[PT 1/4 male screw]- It is counterpart of auto coupler(female).- It is... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea Holder Set Made in Korea Auto Joint Coupler Used when supplying air pressure. No Model Connector Size ? AC - H 6ø Hose ? AC - P PT 1/4" ? AJ - C PT 1/8"PT 1/4" ? AJ - H 6ø... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea Auto Joint Coupler Made in Korea Turn Table Dispenser Features As a equipment which dispenses the liquid with rotation of Jig part mounted on the product, it is suitable for liquid coating with original form on the product since Since the control of rotating angle, speed, etc, of jig through LED window of control part and angle control are available, it is possible for partial dot and dispensing discharge of circle along the selection of user. Tool Part is configured to freely change coating area, and minute setting is available for the part for liquid coating.... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea Turn Table Dispenser Made in Korea Barrel Set 1.Barrel This high precise barrels only for dispenser are designed to stand high pressure considering the liquid's flow property. It' designed o dispense highly viscous liquids with no remainder. The shapes and the materials are decided in consideration of safety. 2.Plunger It plunges materials filled in the barrel with no remainder. There are three kinds for highly Viscous materials,low viscous materials and for prevent liquids from contaction air. 3.Top Cap It is used to close the top of the barrel when you fill it with liquids in advance or store liquids after use. 4.Tip CapIt is used... Read More Inquiry Now Machinery, Industrial Parts & Tools Made in Korea Other Manufacturing & Processing Machinery Made in Korea Barrel Set Made in Korea << Prev1234 Go to Page