Digital Indicator

Description The product have designed specifically to operate with strain gauge sensors such as Fast measurement of Load cell, Pressure Transducer, LVDT, etc. The setup sequence is simple and quick using four push buttons only. High resolving power (16bit A/D) High presision (more than 0.012% F.S) and stability Quick sampling speed (100times/sec) Built-in Shunt calibration switch Watch dog Small size(96 X 48 X 128mm), Cutting size : 92 X 45mm Weight : about 700g Specifications Specifications Accuracy DN15W DN10W Application sensor Strain guage sensor (350Ohm or 120Ohm) Sensor authorized voltage(the number of Loadcell connection) DC 5V, Loadcell (350)available 4DC 10V, Loadcell 120)available 2 DC 5V, Loadcell(350) available 4 Zero adjustment range 100% F.S (Auto Zero) Input signal 1.0, 1.5, 2, 3mV/V(Dip switch) 0.5 ~ 3mV/V Display -19999 ~ 32767 -19999~99999 Display speed Appox 30times/sec(Adjustment available by buff setting) Character height 7Segment 5 digit LED 14mm Decimal point Random setting available A/D converter 16bit, Max. 100 times/sec D/A converter 12bit Zero variation within 0.5mV/°C Sensitivity variation within 0.01%/°C Voltage output   DC 0~10V (OP. 4~20mA) Usage temperature range -10°C ~ 60°C Humidity less than 80% RH (no dew condensation) Power source used 220V 50/60Hz (110V available by internal operation) OptionRelay output   - Upper and lower limit comparisonoutput. 4 relay output. Contact capacity : AC 125V 0.5A,DC 24V 1A Option   RS232C (OP-01), RS485(OP-02), DACANALOG OUT(OP-03), Input 5mV/V ; LVDT (OP-04), Model DH-A