High Speed Digital

Description The DN-50W has designed specifically to operate with strain gauge sensors such as Fast - measurement of Load cell, Pressure Transducer, LVDT, etc. The setup sequence is simple and quick using four push buttons only. And comparison output are available. Sampling speed : Appir. 1000Times Per Second   Features High resolution (24bit ADC, 16bit DAC) High precision (more than 0.01% F.S) and stability Quick sampling speed (1000times/sec) Relay output : Hi, Low, NG, OK. UNIT CONVERSION : kg, N, lb, kg/cm2, bar, MPa Display part and analogue zero by auto zero Analog Peak Hold Small Size (96 X 48 X 128mm) Built-in Shunt calibration switch Peak & sample hold Watch dog Option OP-01 : 4~20mA output OP-02 : RS232C serial interface OP-03 : RS485 Multi drop interface Specifications Spec. Accuracy Application sensor Strain guage sensor (350Ohm or 120Ohm) Sensor authorized voltage(the number of Loadcell connection) DC 5V, Loadcell(350Ohm) available 4 Zero adjustment range 100%F.S (Auto Zero) Input signal 0.5 ~ 3.0mV/V AD converter 24bit 1000times/sec DA converter 16bit 1000times/sec Display -19999 ~ +99999 Display speed Appox. 32times/sec Character height 7Segment 14mm Decimal point Random setting available Sampling speed Max 1000 times/sec Zero variation within 0.5µV/°C Sensitivity variation 50ppm/°C Voltage output 0 ~ 10V (OP. 4~20mA) Usage temperature range -10°C ~ 60°C Humidity less than 80% RH (no dew condensation) Power source used AC 85 ~ 265V 50/60Hz Relay output Contact capacity : AC125/0.5A, DC241/1ARelay life time : more than 5,000,000 times Dimensions