Features
Application of Packer MULTIPLE Ingredient BATCHING SCALE, etc.
2 Step Control(DRIB, FINAL)
6 Control RELAY(FINAL, DRIB, FINISH, BATCH FINISH, ZERO)
RELAY output mode- 7PIN TERMINAL : FINAL, DRIB, FINISH, BATCH FINISH, ZERO- 25PIN CONNECTOR : 8PIN CONTROL- BCD INPUT : 25PIN CONNECTOR
Specifications
ANALOG INPUT AND A/D CONVERSION
Load cell excitation
10VDC±5%, 320mA
Input Signal
0.5 ~ 3.0mV/V
Input Sensitivity
0.45uV/D
Zero adjustment range
-0.6mV~+42mV : combinations of 6bit dip switch
Input
voltage
Max. 32mV
impedance
10MO(Min.)
noise
0.6uVp.p or Less
A/D converter
type : dual slope typeresolution : 1/65,000 counts(16bits)converting speed : 20times/sec
Non-linearity
0.01% of full scale
Temperature-drift
zero ±20PPM/°Cspan ±20PPM/°C
Overload tolerance
+10% of full capacity
Display update rate
20 times/sec
DIGITAL SECTION
Display unit
12.7mm(1/2"), 7digitshighly bright fluorescent tubesub display : 7segment 12digit Red-FNDsize : 9.2(H)x4.8(W)mmx1line
Annunciators
steady, zero, tare, gross, sp1, sp2, run
Decimal point position
0, 0.0, 0.00, 0.000
Keyboard
ten key, zero, net/gross, tare, formula, bin, run/stb, final, drib, free fall, clear, print, enter
External input signal
opical-isolator
min. Division
x1, x2, x5, x10, x20, x50
max. Display
+550,000
Rear panel
Loadcell input : 5pin connectorRemote control : 5pin input terminal (start, stop, tare, tare reset, zero)BCD input : 37pin connectorC ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero)25pin : connector : 8pin control
GENERAL
Data memory back-up
appr. 10year
Power
100/117/120/220/240V AC, ±10%, 50/60ã? (factory preset)
Power consumption
appr. 30VA
Operating condition
temperature : -10~40°C (14~104°F)humidity : 85% Rh Max. (non-condensing)
Net weight
2.4kg
Gross weight
3.1kg
Physical dimensions
(WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch
Fuse
250V/1A
Option
OP1
Printer I/F : Centronics Parallel
OP2
Analog Out : V - out(0~10V)
OP3
Analog Out : I - out(4~20mA)
OP4
Serial I/F : RS 422, RS485
OP5
BCD Data Out-put
* RS-232C and current loop : standard installed
Dimensions
Applications
Digital Weighing
Description
Product Inquiry
Purchase Product Catalog
Payment & Shipping Conditions:
- Payment: We accept payment through Paypal Only.
- Shipping: We will ship the catalog once the payment is received. And you will be receiving the catalog with in 10 -14 busines days. Shipping might be delayed in due to international shipping conditions which is depends on the countries receiveing. In case hard copy of catalog is not available then we will ship the soft copy.
- Refund: We can refund the order before shipping process was initiated. Incase Catalog not available, we will make sure to refund the order.
- Note: This is a Catalog Produt.
Share Digital Weighing in Social Media