FRONT A/C & HEATER SYSTEM

 This air-conditioning system for the driver and front seat passengers consists of a Heater Unit, Evaporator Unit, Blower Unit and AQS.            -Heater Unit  Function   The Heater Unit increases the temperature of the vehicle interior with high-temperature water heated by the engine, removes frost from windows, and maintains optimal temperature while being jointly operated with the air-conditioner.     Components   It is installed in the center of a car, within the instrument...

• Auto Parts Made in Korea
• Other Auto Parts Made in Korea
• FRONT A/C & HEATER SYSTEM Made in Korea

Heater Unit

FunctionsThe heater unit increases the temperature of car interior by using high-temperature cooling water that is heated in the engine, removes the frost from the windowpane, and maintains optimal temperature by jointly operated with the air-conditioner.. ComponentsIt is installed in the center of the car, inside the instrument panel, and is composed of the heater core where the engine cooling water passes, the mode door for air control and the air mix door for temperature control. Its exterior surface is made from plastic cases. Kinds The heater core is made of light aluminum alloy that...

• Auto Parts Made in Korea
• Other Auto Parts Made in Korea
• heater Made in Korea

Evaporator Unit

Performance The evaporator unit changes the refrigerant that passes the expansion process and flows in, under low pressure and low temperature, into vapor by creating thermal exchange with the air in and out of the car. The air from which the heat is taken becomes cooler and moist, and comes inside the car through a blower, maintaining it pleasant. ComponentsThe evaporation unit is composed of the evaporator core, its surrounding case, expansion valve and temperature sensor. The evaporation core is composed of plate and fin type using light aluminum materials. Specification...

• Auto Parts Made in Korea
• Other Auto Parts Made in Korea
• evaporator Made in Korea

Controller

Functions The controller controls the air-conditioner and heater to make the interior of the car pleasant and comfortable. It comes in FATC (full auto temp. controller), semi-auto temperature controller, and manual temperature controller FATC senses the temperature indoors and outdoors, the degree of solar radiation, the temperature of cooling water through sensors, and controls the operation of the air-conditioner and heater, airflow, temperature indicated, and other modes, keeping the interior of the car pleasant and comfortable. Specifications Item Controller (FATC) Rated...

• Auto Parts Made in Korea
• Other Auto Parts Made in Korea
• controller Made in Korea

Compressor

Functions The compressor in the air-conditioner is a key component, and functions like the heart of a man. It is operated by force from the engine of the car, and repeats the process of inhaling, compressing and circulating the refrigerant. It compresses the refrigerant into a low-pressure gas, turns it into high-pressure gas and sends it to the condenser, inhales the refrigerant at the evaporator and evaporates it as a function of...

• Auto Parts Made in Korea
• Other Auto Parts Made in Korea
• compressor Made in Korea

FEM

The FEM is combined with the Cooling Module, Headlamp, Bumper, Carrier, and Horn. Module type production can reduce problems that may arise in the process of assembly because the module is considered as one unit at the stage of designing. Thus, it helps enhance quality and reduce the time required, due to the simultaneous development of parts, and improves functions by creating a synergistic...

• Auto Parts Made in Korea
• Other Auto Parts Made in Korea
• fem Made in Korea