HKRUB200 is the rubber for modeling after the pattern of a tire mold, which is used after mixing
with HKRUBK200. Due to its optimum viscosity, the complicated pattern of a tire mold can be
modeled after perfectly and the intermixing with bubbles has been minimized.
How to use
1. Mix HKRUB200 and HKRUBK200 in ratio of 100:14.
2. Mix by stirring them for at least 2 minutes, and especially pay attention to mixing well at bottom
and side of container.
3. If necessary, use releasing agent.
Curing
1. Full cure is completed after passing 16 hours at temperature of 25?.
2. If...