Rheothix SG-720

Description Our anti-sagging agent, SG-720, is a special pre-activated polyamide wax dispersed in a solvent mixture. It is designed for highly efficient control of anti-sagging and anti-settling in solvent-based industrial coatings and wood finishes. SG-720 gives viscosity increase and develops an exceptionally strong and long lasting thixotropic structure. Advantages Excellent flow and leveling Long retained anti-sagging and anti-settling properties Little or no seeding, gloss reduction, and good inter-coat adhesion Efficient thixotropic structure development Excellent thermal stability Suitable for use in a wide range of solvent based coatings Physical Properties Apperance : Translucent white paste Non-Volatiles : 19~21% Specific Gravity 0.87 ~ 0.89 Solvent : Xylene. Alcohols Application Marine, Architectural, and Heavy duty coatings Clear varnishes and top coats requiring high gloss Industrial wood finishes based on alkyd or acrylic based polyurethane, nitrocellulose, and acid curing. Incorporation Post Addition It is recommended that SG-720 be incorporated into the coatings system at 20 ~50°C using a high speed disperser operated under low to mediun shear conditions over as short time period as possible for maintaining of desired thixotropic structure. (1,0000 ~ 2,500 rpm, 5~25min. depending on viscosity). Too high speed may result in the destruction of the active fibers and reduced performance, but too low shear will result in extended incorporation times. Excessive dispersion times will result in a gradual decline in the final properties of the coatings. Master Batch Master batch can be prepared by dispersing SG-720 in a vehicle using low to medium shear rates. And then, this dispersion can be added to finished paints. This incorporation method is preferred for coatings prepared using specialty pigments such as aluminium powder, flatting agent, and zinc dust. Recommended Levels The typical addition level will vary depending on the type of coating formulations and required degree of anti-sagging & anti-settling performance For anti-settling : 0.5 ~2.0% based on total coatings formulation For anti-sagging : 2.0 ~5.0% based on total coatings formulation Storage SG-720 should be stored in the tightly closed original container in a cool and dry place at 5 ~ 30°C. Avoid exposure to heat source and direct sunlight. Under recommended storage condition, SG-720 may be stored up to 12 months. Packaging 15, 16, 17 Kgs intin can, 175 Kgs in steel drumFull Container Load : 660 tin cans