Introduction This machine is used for both Screening earths and sands & Feeding remaining materials to the Primary Jaw Crusher. Model No. Width × Length Cap(t/hr) Motor(kw) OP-1624 1600 ~ 2400 250 ~ 400 15 OP-1630 1600 ~ 3000 305 ~ 500 19 OP-1930

Introduction This machine is used for feeding of raw materials to the Primary Jaw Crusher. Model Size(mm) (Width x Length) Strocker (mm) V/S Motor (kw) Capacity (t/h) WGF 730 750 x 3000 7 ~ 11 11 50~150 WGF 936 900 x 3600 7 ~ 11 15 100~200 WGF

Introduction This machine is used for Sand Screening to increase screening effects. We, since then, could began to export our crushing equipments & turn-key plants to the Central Asian countries like Georgia, Uzbekistan, Kazakhstan & Mongolia inclues Russi, the Asian countries like India, Sri Lanka, Bangladesh, Cambodia, Miyanma & Vietnam,

Introduction This machine is used for screening of final crushed materials to each different size. Model No. Screen Size Dimension Area(?) Motor(kw × p) W L N WVS 1230 1200 × 3000 1200 3000 1588 3.6 11 × 4 WVS 1536 1500 ×

Introduction This machine is mainly used for Sand-Making & increasing of Cubical Shaping at the Tertiary Stage

Introduction This machine is mainly used for Secondary Crushing as well as Spring Type Cone Crushers. Same as the Spring Type Cone Crushers except the Hydraulic Cyliders instead of the Release Springs out-side of the

Introduction This machine is mainly used for Secondary Crushing. Specification Approx. Capacity(t/h) Motor (kw) Pulley (r.p.m) Approx. Shipping Wgt.(ton) Closed (mm) Open (mm) 4 6 10 13 16 20 25 30 40 50 60 CC-900 125 140 30 52 49 54 76 86 97 113

Introduction This machine is mainly used for the Primary Crushing. Main Dimention Model No.

Introduction This Unit is used for cleaning for recycling of waste waters after washed final product (Gravels & Sands) at the Sand-Making & Recycling

Introduction This equipment is used for transporting all materials between the equipments. Model No. Width × Length Cap(t/hr) Motor(kw) OP-1624 1600 ~ 2400 250 ~ 400 15 OP-1630 1600 ~ 3000 305 ~ 500 19 OP-1930 1900 ~ 3000 450 ~ 600

Introduction This machine is used for feeding slowly, uniformly & bigger volume of raw materials into the heavy-Duty Primary Jaw Crushers. Model Dimensions Width x Length(mm) Max. Size of Feed (mm) Speed of Apron (m/min) Capacity (t/h) Motor (kw x p) WAF-0930 900 x 3,000 900 x