Hydraulic Compactor [ Made in Korea ]

Useful for road construction, foundation & backfill - Strong frequency & backfill - Longer lifetime of damper - Changeable bottom

• Heavy construction machinery and equipment Made in Korea
• Hydraulic Compactor Made in Korea

Hydraulic Crusher [ Made in Korea ]

FINE Crusher is an efficient attachment for the separation of concrete and steel. High Operating Efficiency High-speed opening mechanism of the jaws increases efficient working procedures and 360 degree rotating mechanism with hydralic motor/without motor. High Operating Efficiency Abrasive-resistant special materials

• Heavy construction machinery and equipment Made in Korea
• Hydraulic Crusher Made in Korea

twin hader [ Made in Korea ]

Main specifications DK - 150 Weight with Mounting bracket MAX 185 Kg Drum Speed 60 rpm at 75 L/min Cutting Width 460 mm Drum Diameter 300 mm Output shaft torque 300 Kg.m Cutting Force 1100 Kg.f Recommended Oil value MAX 175 Kg/? MAX 75 L/min Applicable Material hardness MAX 150 kg.f/? Applicable Base machine 0.05? ~ 0.15? Bit Type POINT

• Heavy construction machinery and equipment Made in Korea
• twin header Made in Korea
• breaker Made in Korea
• machine Made in Korea

twin header [ Made in Korea ]

Main specifications DK - 450 Weight with Mounting bracket MAX 480 Kg Drum Speed 50 rpm at 110 L/min Cutting Width 515 mm Drum Diameter 355 mm Output shaft torque 680 Kg.m Cutting Force 2300 Kg.f Recommended Oil value MAX 175 Kg/? MAX 110 L/min Applicable Material hardness MAX 250 kg.f/? Applicable Base machine 0.2? ~ 0.4? Bit Type POINT

• Heavy construction machinery and equipment Made in Korea
• twin header Made in Korea
• breaker Made in Korea
• machine Made in Korea

twin header [ Made in Korea ]

Main specifications DK - 1300 Weight with Mounting bracket MAX 1250 Kg Drum Speed 68 rpm at 240 L/min Cutting Width 740 mm Drum Diameter 508 mm Output shaft torque 1100 Kg.m Cutting Force 3300 Kg.f Recommended Oil value MAX 175 Kg/? MAX 240 L/min Applicable Material hardness MAX 300 kg.f/? Applicable Base machine 0.6 ? ~ 0.9 ? Bit Type POINT

• Heavy construction machinery and equipment Made in Korea
• twin header Made in Korea
• breaker Made in Korea
• machine Made in Korea

twin header [ Made in Korea ]

Main specifications DK - 1300 Weight with Mounting bracket MAX 1250 Kg Drum Speed 68 rpm at 240 L/min Cutting Width 740 mm Drum Diameter 508 mm Output shaft torque 1100 Kg.m Cutting Force 3300 Kg.f Recommended Oil value MAX 175 Kg/? MAX 240 L/min Applicable Material hardness MAX 300 kg.f/? Applicable Base machine 0.6 ? ~ 0.9 ? Bit Type POINT

• Heavy construction machinery and equipment Made in Korea
• twin header Made in Korea
• breaker Made in Korea
• machine Made in Korea

drill master [ Made in Korea ]

earth anchor drilling, - hot spring developments, - underground water developments, ground reinforcing drilling, - geological examining drilling, - tunnel horizontal drilling, - tunnel rack bolt drilling, - tunnel blaster drilling, - stony mountain blaster drilling,

• Heavy construction machinery and equipment Made in Korea
• twin header Made in Korea
• breaker Made in Korea
• machine Made in Korea
• drill master Made in Korea

PLANT for ROCKY MOUNTAIN [ Made in Korea ]

These process are a PLANT to pick the aggregates from the rocky mountain. It is the PLANT which manufactures sand after aggregate which was gathered from the rocky mountains is crushed, and then processes the nature sand with a similar

• Heavy construction machinery and equipment Made in Korea
• twin header Made in Korea
• breaker Made in Korea
• machine Made in Korea
• drill master Made in Korea

RECYCLING PLANT [ Made in Korea ]

It is the plant which has produced to regenerative aggregates with 200~300mm from the nasty concrete with the desk size (approximately 1~2m) in the process for the construction waste material After, it is produced the regeneration aggregate with approximately 13~40mm through the cone crusher Finally, it is plant which produces a regeneration fine

• Heavy construction machinery and equipment Made in Korea
• twin header Made in Korea
• breaker Made in Korea
• machine Made in Korea
• drill master Made in Korea

SAND CRUSHER [ Made in Korea ]

It is crush unit to manufacture with high-quality regeneration sand with fine size (approximately 5~6mm) from regeneration aggregate more than 45mm crushed in Cone crusher In regeneration plant (recycling

• Heavy construction machinery and equipment Made in Korea
• twin header Made in Korea
• breaker Made in Korea
• machine Made in Korea
• drill master Made in Korea