-
Features
General laboratory vortex mixer.
Can be used for tube mixing and flask mixing by replacing head.
Push touch type with manual/continuous select switch.
Specification
Model
J-MF
Overall size(W x D x H) (mm)
125 x 185 x 160
Speed range (rpm)
3,000(Max.)
Motor (W)
23
Material
ABS
-
Features
PID auto-tuning controller maintains uniform temperature for long periods.
Digital readout displays pre-set temperature and current operating temperature.
Settings for the temperature and timer can be easily done with soft touch key pads.
Sight glass is installed (J-PWB2)
-
Features
It, as a product accomplished through the review and study in items of ergonomics considering the convenience of workers, would resolve the worker's needs dramatically by cutting steel plates freely with no limitation, Especially, it has a smooth clutch area and long life-cycle with no backlashing.
Specification
2 Torch Cutter
-
Features
It, as an portable-type automatic gas cutter, has a strong cutting power and accuracy, as well as diverse application and economic benefit, it can be operated continuously for long-term, and is proud of features, which are simplicity in replacement of spare parts compared to existing products and seamless cuts.
Ensures that
-
Air Blowing Machine
Product Name - Engine CarrierUse - Engine accessory assemblyFunction - Upper plate turnCustomer - HMC
Product Name - Engine CarrierUse - Engine accessory assemblyFunction - Upper plate turnCustomer - HMC
Product Name - Engine CarrierUse - Engine accessory assemblyFunction - Upper plate turnCustomer -
-
Features
Attaches panes of glass after visual recognition in the case of an abnormal alignment of the window glass
Allows the use of the existing frames for existing processes and the use of processing trays
Compatible with existing IR attachment equipment
Quick job changing enabled by model registration
High precision secured through
-
Features
High efficient dust removal is carried out by HEPA filter (99.97% efficiency on particle of 0.3µm).
Air flow level is displayed in red (for filter change), yellow (filter change soon), green (filter in normal condition) colored 10 segment bar-graph LED display.
UV lamps installed in workspace and air-path in back panel sterilize
-
Features
High efficiency stirrer with low vibration ensures uniform temperature.
Timer is attached for convenience when measuring viscosity.
Water cooling system is installed which enables operations at different temperature in a short time.
To protect glass chamber, stainless steel plate cover is attached on backside and polycarbonate
-
Features
Improved productivity through the use of dual heads
Precise management of height specifications through the use of a height sensor
Improved lens connection quality through the use of a torque control system
Quick job changing enabled by model registration
High precision through machine vision technology
Database-based history
-
Feature
Inspects the upper and lower plate of the lead frame at the same time using three line-scan cameras
Database-based history management of passed or failed inspections
Easy to set up and operate the equipment
Quick job changing (5µm) using a graphic user interface
Easy model changing
Reduced tack time for product inspection by
-
Feature
Effectively discharges foreign substances using vibration
Air blowing applied to both top and bottom sides
Discharges contaminated air through air vent at the same time with air blowing
Free set up of air blowing time in seconds (6 seconds to one minute)
Max. 200mm x 200mm jig can be used
Easy change of jigs as they are
-
Feature
Application of the high speed linear & mini-spin methods
Easy to set up and operate the equipment
Quick job changing using the GUI
Database-based history management
High speed loading enabled by the application of high speed linear & mini-spin methods
Quick workability and handling of various models enabled by model
-
Introduction
Industrial RFID systems - Right data in the right place at the right time
BIS C - Standard type
BIS L - Low-cost type
BIS M - Multi-functional type
BIS S - Mass-capacity high speed type
BIS (Balluff Identification System)
Upper layer interface: - MELSEC direct connection type, CC-LINK, Profibus, Profinet,
-
Features
Top-plate is coated with ceramic : - resistant to corrosive chemicals and easy to clean. - rapid heating surfaces with excellent thermal distribution.
Heating and stirring operation can be performed at the same time or separately.
Hot plate is separated from main body by heat resistant plate to protect the electronic parts and
-
Features
Microprocessor PID auto-tuning controller with digital setting and display.
Overheating is prevented by automatic shut-off circuit.
Fan motor installed circulating hot air ensures uniform temperature distribution in a chamber.
Specification
Model
J-100S-F
J-100M-F
Type
Forced convection system
Environmental
-
Features
Epoxy resin top plate & sink (DURCON Inc. USA) guarantees corrosion free fume hood.
All the internal fixtures including water & gas line, light source and power outlet are made of anti-corrosive materials.
Powerful exhaust fan motor offers efficient and quick ventilation.
Window with transparent safety glass (5mm)
-
Features
Air jacket system ensures precise temperature control at high temperature on uniform level throughout the chamber.
One touch type door catcher allows you to open/close the door without vibration that may affect the contents in the chamber.
P.I.D temperature controller operated by microprocessor regulates the temperature of chamber
-
Features
General type drying oven for glass ware.
ELB(Electrical Leakage Breaker) installed as safety device.
Optimized structure chamber for uniform temperature distribution.
Specification
Model
J-DECO
Type
Gravity convection system
Overall size (W x D x H, mm)
520 x 530 x 795
Chamber size (W x D x H, mm)
400 x 400
-
Features
Bath, used for removing paraffin wrinkles and foam(bubble) in pathology room & hospital laboratory, is made of aluminum.
Digital controller ensures precision temperature control.
Settings for the temperature can be easily done with soft touch key pads.
Specification
Model
J-NBT
bath inner size(Ø x H, mm)
220 x
-
Features
Microprocessor PID controller with digital setting and display.
Fan motor installed circulating cool air ensures uniform temperature distribution in chamber.
Specification
Model
J-CC1
J-CC2
Environmental temp. range
5°C ~ 30°C
Overall size (W x D x H, mm)
865 x 890 x 1,990
1,370 x 990 x 1,990
Chamber size (W