-
Product DescriptionSystem that stably processes various solid waste matter by melting them using high-temperature Arc Plasma. It is equipped with latter-stage equipment such as electric dust collectors and absorption columns that process the various harmful gases and by-products generated during the process of melting the waste material
Product
-
Product Description
Off gas treatment equipment using adsorbent for the toxic gas elimination in the semiconductor manufacturing process.
Product Feature- Low absorbent replacement cost- Own development & production of absorbent can save the manufacturing cost and build competitive supply system for customers satisfaction -
-
Product DescriptionThis system can successfully remove acid gas in the off gas by spraying mist forms of the calcium hydroxide slurry to the off gas.Calcium hydroxide in a slurry form react with acid gas (HCl, SOx) by gas/liquid contact reaction. It instantly gets dry by the heat of the off gas and gas/solid reaction took place. At this time,
-
Product DescriptionThe process of this type of dust collector is that dusts are feed to the bottom of housing by induced or forced draft. Then the dust will be deposited in the surface of filter. Cleaned off gas passing through the inside of filter and emitted through upper section of housing to the atmosphere.The dust deposited on the surface of
-
Product DescriptionThe fluid is drained out by the pressure and velocity induced by the centrifugal force of the impeller and the lift force of the wings, and is pumped by the pressure applied from the casing equipped with a guide
-
Product DescriptionMetal fiber is very thin metal filament manufactured with our own special manufacturing method and available in various alloys. Its diameter is ranged from 80? up to 20? which is at least 4 times thinner than hair.(1?=0.001mm)
Product FeatureHigh flexbility for various shapes.
Product Specification /
-
Product DescriptionProcess powder created as the by-products of combustion decomposition in the Scrubber, as well as processing HF, F2, etc. Using a spray nozzle that is installed within the Wet E.P. for the purpose of processing water-soluble gases.Product Feature- Uses technology for preventing corrosion and stoppage in the ducts- Applies our
-
Product DescriptionF gas,which is heightened in reactivity by having been activated using ctclone arc plasma, is supplied to the pipes within the semiconductor manufacturing process, thereby removing powder that is adhered to, or will potentially adhere to, the internals of poping.Product Feature- Utilize know-how acquired through years of
-
Product DescriptionA system for stably processing pathogenic, high molecular waste material that pose a risk of secondary infection. It uses ultra high temperature plasma heat to bring about the heat-decomposition of the waste material using Arc plasma, and water-soluble gases and micro-particles are processed using the wet unit and the
-
? TFP-H100 ES/ ET
1. CHARACTERISTICS
* Fan blade is made of SUS material for preventing the corrosion
from the ammonia gas of barns and poultry farms.
* Adhered the net to prevent the accident and to optimize
assembly.
* Fixed the impeller by both a nut and the stripper bolt for
the durability and
-
? TFP-H100 FS/ FT
1. CHARACTERISTICS
* Fan blade is made of SUS material for preventing the corrosion
from the ammonia gas of barns and poultry farms.
* Adhered the net to prevent the accident and to optimize
assembly.
* Fixed the impeller by both a nut and the stripper bolt for
the
-
? TFS-Series
1. CHARACTERISTICS
* Optimized design for the supreme function of the blade and motor.
* Can be used between spiral duct and duct like in line fan.
* Efficient in a region of high static pressure.
* Become silent when the static pressure is high.
* Attached the anti-vibration rubber.
* Embossing treatment to the inlet sections
-
[Purpose and Applications]
A mechanical system that transforms mechanical energy into pressure energy and speed energy using the rotational motion of the impeller.
[Merits or Strength compared to other similar domestic and overseas technologies and products]
Certified for CE, UL, ISO9001:2008 and ISO14001:2004
[General
-
Key TechnologyDesigned For Stability In Rotating BodySymmetrical stability construction• Bilaterally symmetrical structure- Axial direction thrust allows easier load counter balance. (Axial load=0)- Little or no effect from balancing, alignments - Stability and durability enhanced structure.• Carries out work
-
1. Availble for all blower
2. Available for high efficiency motor and explosion proof motor
3. Type of Motor : Vertical Type
4. Strong bed frame
5. Detail dimension drawing and performance curve is available when customer
-
01. Availble for all blower
02. Can be used at where no electric power source
03. Strong structure.
04. Detail dimension drawing is available when customer
-
Product DescriptionCFD(computerized Fluid Dynamics) analysis can promote optimum design for the combustion chamber, combustion air nozzle placement, forced draft flow pattern and complete combustion. The operation of the incinerator is very stable and the off gas from the incinerator can be controlled to meet environmental regulations. Other
-
Product DescriptionSystem that stably processes various solid waste matter by melting them using high-temperature Arc Plasma. It is equipped with latter-stage equipment such as electric dust collectors and absorption columns that process the various harmful gases and by-products generated during the process of melting the waste material
Product
-
HELIX for PET bottles & cans developed for effective recovery process for daily discarded disposals (PET bottles & cans). Once disposable beverage containers used by the consumer are put in this machine and analysed as PET bottles after the 1st analysis in the slot of the machine, the 2nd compression is processed to reduce the volume up to
-
*Usage
Equipment spraying high pressure water to clean and remove burrs (chips) remaining after processing transmission cases and housings of automobiles, ABS bodies and oleo-pneumatic valve materials.
- The high pressure part cleaner Smart Jet provided by SM Korea does not use mechanical methods such as abrasives or brush or chemical