-
[Effect of SKEW PREVENTIVE PUSH ROLLER]
?It fixes skew phenomenon and reduces ore dropping.
?Roller is covered with synthetic rubber, so that the belt cannot be damaged.
?It is installed on the exterior of the tail side, so that it is possible to change the angle while the machine is running after a visual check.
?Installation is not limited
-
Introduction
Product Description
1. Protecting step-out minimizes vibrations in motor and keeps high torque at high velocity.
2. Precision control by controlling the drivers with low noise and less vibration.
3. With digital control method, easy to control current by setting the current value during
rotation or stopping.
4. Easy to
-
Introduction
- Will not break easily because it has a solid design
- A rolling type product that can be used easily
- Equipped with a fixing unit to prevent it from being pushed backward
- A cylindrical internal structure to resolve the problems of accumulation of dusts
- Patent application: No.
-
Roll Former V-115 conbined PE Foam
[ Specification]
Dimension
L12000*W1760*H1830
Weight
About 12000KG
Power
15KW*380V*60HZ (main frame)
Station
24pass
Design Type
All Forming
Capacity
0.5t 18m/min P/E Foam
-
LED STREET LIGHTING LAMP
DC12V - HLL-S050
Input voltage : 10.7V
Incoming current : 4.68A
Input power : 50W
Speed of light : 4255lm
Color Temp : 5801K
Color rendition : 74Ra
Efficiency : 75.1lm/w
Average illuminance : 33.2Lux
DC12V - HLL-S070
Input voltage : 11.3V
Incoming current : 6.21A
Input power : 70.1W
Speed of
-
A variety of industrial measurement instrumentation signals display in the field or as a signal monitoring in
control room that to sending the HMI or plc.
Features:1. Multi Input signals : T/C,RTD,DC mV, DC mA,4~20mA
2. Embedded sensor power : DC 24V/50mA3. Standard output signal : Relay 2P + Analog 4~20mA
4. Size : 96(W) x 48(H) x
-
1Axis
-
Introduction
¦ Outline
¦ Features
- RS-485 Communication connected each Sensor Controller, Display, Main server, etc.
-RS-485 Communication, Diagnostic and setup available
¦
-
Principle of generator controllers Hybrid Booster, depending on the voltage generator voltage is generated. To boost the battery is charging.
Hybrid PWM Controller is made to PWM charge most safely by controlling the wind turbine energy and solar panel energy at the same time.
Especially, Volt Regulator is controlled with PWM method to prevent
-
Introduction
DC24C-24600
1.INPUT VOLTAGE:DC24V
2.OUTPUT VOLTAGE:DC 0V-24V
3.POWER MOTOR:6W-600W
4.SPEED
-
A medical device with superb quality / Attractive design / New ergonomic product
Features:•Has many needles (192 vs 540)
•Has less needle angle of 6°
•A Mosquito type needle
•No side effects
•Attach and detachable head unit
•Fast healing period
•No permanent damage to the skin
•Easy to use
•Applicable to multiple
-
BUS-STOP LIGHTING SYSTEM
- HLS-024P/HLS-024L
- Best PPS product
- Government ID.NO : HLS-024P: 39111527-21951523
HLS-024L: 39111527-21951522
- Controller : HLC-22024(12V/60W)
- Solar module : 120W
- Battery : HLS-024P: lead/DC 80AH/HLS-024L: lithium 120AH
- LED lamp: POWER LED
-
Roll-to-roll sputter system for the window solar film
The system apparatus for depositing the high quality window solar film
The system, window film deposition installation, is used to screen the rays of the sun(infrared rays, ultraviolet rays etc) for the building and automotive in use and in a position to produce a single layer and multi
-
[SKEW PREVENTIVE I-TYPE ROLLER]
?This product is designed to prevent skew for short and two-way conveyor belt.
[Effects of SKEW PREVENTIVE I-TYPE ROLLER]
?It shows outstanding performance for two-way conveyor belt.
?It shows outstanding performance where automatic aligning system cannot function properly owing to short working section.
?It
-
GRANT SUPER GREASE EP NLGI No.2 uses the highly refined mineral oil and lithium soap to manufacture.
It is a product with improved load resistance capability, waterproofing capability and mechanical stability.
* Packages : Non-returnable 180 kg drum & 15 kg pail
Features:It is appropriate for the bearing and lubrication point of automobile
-
Introduction
Easy maintenance for heating roller.
Just 2 step could be remove rollers.
First, oper cove.
End, remove roller cover 2pcs.
Clean up or replace, No problem.
Electric heating coil roller
Uniform heat onductivity is not broken.
Long life-time.
Be simple is smart.
-
Roll Former
[Specification]
Dimension
L10000*W1760*H1830
Weight
About 15,000KG
Power
7.5KW*2EA*380V*60HZ 3KW*1EA (Unit)
Station
20 Pass * 2
Design Type
Center Forming
Capacity
0.5t , 18m/min
-
Performance improvement factors
- Dual mode BMS, and charging/discharging efficiency improvement
- Automatic control of cloudy days (very little sunlight) according to SoC
- Automatic control of ON/OFF and ON current
Environment adaptation factor
- Allows for charging during the winter season
- Realization of mood lighting and color
-
? SDP-10
- Generates + and - ions at the same time
- Can be used by being connected to guns, nozzles, static bars and the like
- Ion balancing function
- For spraying appropriate amount of ions through pulse control. With its compact size and light weight, it is easy to handle
- Standards : 105(W) X 180(D) X 90(H)mm
- Input : 220V60Hz/DC
-
Most of Solar LED Lighting products on the current market (e.g. Solar Garden Lights, etc.) adopt
rechargeable battery as an electrical energy storage device. However, we, Solar tech, have
adopted EDLC(Electric Double Layer Capacitor) for electrical energy storage device. So our LED
landscape lighting products are eco-friendly, and product life