-
-Alternating current (AC) using the light-emitting efficiency and minimize power loss (life) to
maximize.
-Variety of applications utilizing.
-SMPS, transformer required.
-Low prices, maximum heat dissipation effect
-Maintenance cost savings in
-
This wire is used for grounding of electric apparatus, excellent flame retardant.
1. Conductor : Annealed copper wire(Concentric Circular, Compact Circular).
2. Insulation : Flame Retardant PVC
3. Color of Insulation :
-
? Bandwidth
?DC~80MHz : DS-1080, DS-1080C
?DC~100MHz: DS-1100, DS-1100C
?DC~150MHz: DS-1150, DS-1150C
?DC~250MHz: DS-1250, DS-1250C
? 200MSa/s Real-time Sampling Rate
? 25GSa/s Equivalent Sampling Rate
? Memory Length: 32KByte per CH
? Fast Trigger On/Off
? Saving 10 waveforms & 10 setup parameters
-
ELECTRIC FIELD ITEMS
1. RPM Sensor Analog Type
Features]
-Stand Vibration 20G-Frequency : 30~200Hz
2, Tilt Sensor
ON-OFF Solenoid Valve
3. Shut-off Solenoid
Features]
-Compact design for usage in tight spaces
-Reverse polarity protected
-Dual coil solenoid provides
-Stand Vibration 20G
-Frequency : 30~200Hz
4. Oil Pressure Pilot
-
Low noise/No vibration
The core part of a hot-water matt is no other than the boiler. When it comes to the boiler that uses the instant heating system that is based on the diaphragm method developed by GAPS, as there is no hot-water circulation motor pump, the vibration and operating noise levels are very low, and as a diaphragm valve is
-
? Structure
1. Conductor: Electric annealed copper wire or hard-drawn copper wire (the annealed copper wire of less than 5.5? can be replaced with the tin plating annealed copper wire)2. Insulator : PVC
3. Insulator color: Black (For color identification, use black, white, red, green, yellow and blue)
4. The highest allowable temperature :
-
Applications
KUHS-225 is a flexible , flame-retardant heat shrinkable polyolefin tubing. It is designed for a wide range of applications including electrical insulation , strain relief , cable bundling , and color coding and identification of wires, cables, and electrical & electronic components , mechanical protection.
?UL-224 125? 600V
-
Standard internal charger for EV
- Set in various EV models produced in Korea
- Solved vibration and internal heat control
- Available CAN communication in option
Input voltage range
AC 200~250V
Line frequency
50~60Hz
Output voltage
DC 81.6V (86.4V max)
Input
-
Spec:1. GROVER HEAD MACHINE.
2. WILKINSON HARDWARE.
3. EMG
-
This wire is used for drop-introma terminal box to the inside of building
1. Sheathed :
-
The electric governor generally apply to the dieselengine-generator and
The fluctuation ratio of frequency is stable within 0.5% of rated frequency.
This system is able to improve the engine performance 20% above
Features: EGM’S Electric governor systems are able to apply the meachnial governor equipped all dieselengine easily.
Spec:
-
Slipring
The brush type slipring is an electrical parts transferring a power and some kinds of signals
without twist of wires between rotor and stator.
As using a precious metal brush,
the brush type slipring solve the problems which are occurring
in carbon type slipring like electrical noise, maintenance, life cycle and so
-
Thermoelectric cooling unit is a cooling system using thermoelectric semi-conductor and designed to
maintain the proper temperature inside sealed electronics cabinet system with its embedded
temperature control circuit.
Features:This small and lightweight product does not require refrigerant of the existing compressor method and
mechanical
-
Principle of eliminating static electricity
If you connect the brush to objects with static electricity, an unequal electric fleld forms and the air near the brush where the power of electric field strengthens is ionized. These opposite electric charges within this ionized area are attracted to electrification objects. So anti-static occurs from
-
This cable is the purpose of using in power distribution line having excellent electrical, physical and chemical properties.
1. Conductor : Annealed Copper wire (water blocking Compact Circulr)
2. Conductor screen : Semi-conductive XLPE or TR semi-conductive XLPE
3. Insulation : XLPE
4. Insulation screen : Semi-conductive XLPE or TR
-
Mosquito avoidance of our CO.HM Light’s ‘fogmy’ eco-friendly and harmless to the human body
when the existing supplies to kill mosquitoes and compared the $0.1 or so coming out one month
electricity energy saving products. Recognition of these technologies have already designed, crafted
items had been selected as a venture company by
-
It is chiefly used for drop-in from overhead distribution line, under A.C. 600V grade, and very convenient for wiring, color being easily identified.
It is weather proof and can be used for a long period without damage due to fire, electrical shock and other accidents.
1. Conductor : Hard-drawn copper wire (But 22?~60? is annealed copper
-
Applications
UNI-END CAPS is designed for sealing of power cable and telecommunication cable termination, cable termination, industrial pipe,conduits.
Also are suitable for protecting and insulation, water-proof of cable from humidity.
The cross-linked polyolefin tubing and inner wall is adhesive by hot-melt and polyamide.
Features
?shrink ratio:
-
? Frequency Range (Sine & Square waveforms)
? DC-10MHz: DS-3025A
? DC-20MHz: DS-3060A
? DC-40MHz: DS-3100A
? 14bits vertical A/D resolution
? Max. 10MHz impulse signal frequency output
? 30 kind of built in waveforms with 1MHz frequency
? Support AM, FM, PWM, FSK, PSK, Bias modulation
? 8kpts Arbitrary waveforms
-