-
Descriptions
Application : Injection Molding
Characteristics : High Impact Strength, High Flowability
Use Case : Silicon Catridge, Picnic Table, Bottle Cap
Specification
Item (term)
Value
Unit
Method
Melt Index
6
g/10min.
ASTM D1238
Density
0.958
g/cm3
ASTM D1505
Physical Properties
Item
-
Descriptions
Application : Injection Molding
Characteristics : General Purpose
Use Case : General Home Appliances, Thin Walled Acticle
Specification
Item (term)
Value
Unit
Method
Melt Index
8.5
g/10min.
ASTM D1238
Density
0.9
g/cm3
ASTM D1505
Physical Properties
Item (term)
Value
Unit
Method
Mold
-
Descriptions
Application : Injection Molding
Characteristics : Impact Resistance, High Transparency
Use Case : Transparent Food Container, Medical Bottle, Video/CD/DVD Case
Specification
Item (term)
Value
Unit
Method
Melt Index
19
g/10min.
ASTM D1238
Density
0.9
g/cm3
ASTM D1505
Physical Properties
Item
-
Descriptions
Application : Injection Molding
Characteristics : High Stiffness, Impact Strength, Heat Resistance, High Luster, Scratch Resistance, All Color94HB
Use Case : Automobile Parts, Electric Good's Housing
Specification
Item (term)
Value
Unit
Method
Melt Index
10
g/10min.
ASTM D1238
Density
0.91
g/cm3
ASTM
-
Descriptions
1. PU Toner & Enamel for Wet process Type of aritificial Leather
Full
Tinting
HW-100 (N) WHITE
47-49
7
Normal Type
Titanium Dioxide
HW-100 WHITE
47-49
7
5
Titanium
-
Descriptions
Polyurethane resins for Dry-process synthetic leather and PU coated split (action) leather: It is used in manufacturing various synthetic leather through transfer-coating process using release paper on fabric materials of woven & non-woven. It can be applied to garment, shoes, bag, furniture, etc. By selecting process method
-
Descriptions
1.A cross-linking agents
A cross-linking agents is a poly isocyanate applied to a 2-component adhesive.Mixing a cross-linking agent with 2-component adhesive results in a cross-linked film with good adhesion, elasticity, and chemical and solvent resistance. The adequate level of hardness may be obtained by controlling the adding
-
Descriptions
HD-series are assistant agents, used for increasing processibility and product quality.
Item
Effective component, %
Ionic
Characteristics & Application
HD-7
100
Nonionic
Non curling, high speed coagulation , Wet process of synthetic leather & textile
HD-110
70
Anion
Large cell, Wet process of synthetic
-
Descriptions
Polyurethane Resins For Wet-Process Artificial Leather: Developed for the application of Wet-processed synthetic leather, 1-component PU is a thermoplastic Polyurethane solution. When solvent (DMF) is extracted into Water, it forms a film having genuine leather-like texture and functions. The results are excellent elasticity,
-
Descriptions
CDP-30 is a water reducing agent made of polycarboxyl compound that reduces the use of water, improves fluidity and strength of concrete, and reduces slump loss.
Physical Properites
Appearance Pale yellow liquid
pH 7 ± 1
Viscosity 600 cps
Solid 40 ± 1
Product features and effects
Addition of small amount produces
-
Descriptions
CLEN-WS is a powerful cleaning agent made of alkaloid with porous surface. It cleanses contaminants on the felt or wire produced due to pitch or gum.
Physical Properites
Appearance Colorless transparent liquid
pH 7.5 ± 1
Ionic character Nonionic
Solubility Readily soluble in cold water
Product features and
-
Descriptions
DEINK-KDA is a surfactant type deinking agent. It has excellent biodegradability and it is appropriate for FLOTATION SYSTEM. It is effective for the deinking of ONP.
Physical Properites
Appearance Light yellow liquid
pH 6.5 ± 0.5(1% solution)
Ionic character Nonionic
Solubility Readily soluble in cold water
-
Descriptions
DEFOAM-AFP is a silicon type defoaming agent that destroys and inhibits foams excellently. It is very effective for foams generated in the production process and wastewater treatment process.
Physical Properites
Appearance White Emulsion
pH 7.0 ± 0.5
Ionic character Nonionic
Solid 15 ± 1
Product features and
-
Descriptions
ACRYSOL-TT935
Acrysol TT-935 synthetic thickener provides a low cost/high performance alternative to cellulosic thickeners in flat latex paints. Not only is Acrysol TT-935 lower in cost than most commonly used grades of cellulosic and modified HEC thickeners, it provides paints with outstanding resistance to roller spattering
-
Descriptions
PH-Sensitive dye : neutral PH (non-Fluorescent)->acidic PH(bright
-
Descriptions
ACRYSOL-TT935
Acrysol TT-935 synthetic thickener provides a low cost/high performance alternative to cellulosic thickeners in flat latex paints. Not only is Acrysol TT-935 lower in cost than most commonly used grades of cellulosic and modified HEC thickeners, it provides paints with outstanding resistance to roller spattering
-
Descriptions
ACRYSOLI-62
Acrysol I-62 is an aqueous colloidal dispersing resin supplied in the unneutralized form which has broad utility in dispersing organic and inorganic pigments. It contains both acid and hydroxyl functionalities which may be utilized in post-print crosslinking. The advantages of using Acrysol I-62 can be as follows.
-
Descriptions
OROTAN 1288
Orotan 1288 is a polyacrylate dispersant designed for waterborne paints.Orotan 1288 can be used in a wide range of formulations, including flat primers, low VOC paints, interior and exterior flat, sheen, and semigloss paints.This sodium salt of a carboxylate polyelectrolyte provides many formulating benefits,
-
Descriptions
Maincote HG-56
Maincote HG-56 is an aqueous emulsion designed as a binder for protective coatings. When formulated as a primer and a topcoat for industrial maintenance applications, it has durability, corrosion resistance, chemical resistance and toughness comparable to solvent borne systems presently used commercially. In
-
Descriptions
Application : Injection Molding
Characteristics : Heat Resistance, High Stiffness, Processability, Scratch Resistance, Tapping Impact Strength, AllColor 94HB
Use Case : Automobile Parts, Electric Goods’ Housing, Home Appliances, etc.
Specification
Item (term)
Value
Unit
Method
Melt Index
6
g/10min.
ASTM