-
V.W. Load Cell is designed to measure load working on earth anchor. Rated Capacities
Customized for 100~150 tons, 200 tons or higher Over Range Capacity 150% F.S Sensitivity
±0.025% Accuracy ±0.025% to ±0.5% Temperature Range -20? ~ +80?
CONFIGURATION AND OPERATING PRINCIPLE
PURPOSE
- Prolonged Monitoring changes in loads on anchor
-
Introduction
DAEDONG ENG. Hydraulic Auger drills are used for pre-drilling prior to pile placement, removing soil plugs from driving piles, installation of tiebacks, and auger-cast piles. Our Auger drill features heavy-duty hydraulic components with fixed or variable torque capabilities. You can attach using excavator of 25~35ton
-
Features: high quality
-
Introduction
R32 (1 1/4")
R38 ( 1 1/2"
-
Solex SS-10 is the synthetic water-soluble type cutting lubrications. It contains special additives and developed for the heavy cutting process, and some special skin parts require luminous intensity.
Especially, it removes the existing disadvantage for viscosity and machining problem. It also has an advantage to use various processes by
-
earth anchor drilling, - hot spring developments, - underground water developments, ground reinforcing drilling, - geological examining drilling, - tunnel horizontal drilling, - tunnel rack bolt drilling, - tunnel blaster drilling, - stony mountain blaster drilling,
-
Drifter parts like piston, chuck, chuck bushing, guide valve, damping piston, long bolt etc mainly for famous drilling equipment. There are stocks available, just mail us
-
Introduction
PILE DRIVER (VIBRO HAMMER) GENERAL TYPE - DPD350, DPD450, DPD600
- Driving & Extracting Sheet pile, H-beam, Tube and steel plate
- Higher economical & maneuverability than that of crane attached pile driver.
- Excellent workability and double safety.
- 360 degrees rotation for easy operation
- Easy installation using breaker
-
Water swivel
for N Size, H size.
for Construction Boring job
it supplys water during Core Drilling
-
-
Introduction
1. Economy
- No need hydraulic power pack of crane. As Daedong vibro hammer Dpd
- 350 required 200bar and 180l/min fuel consumption can be saved significantly.
It assures good quality and satisfaction.
2. Accessibility
- Compared to with crane DPD-350 can access easily downtown areas, bridge, corner of pillar, narrow place
-
Rifle nut. All kinds can be made. Good
-
Introduction
Volts
Amp
Power
Max Bit
220V
60Hz
3,300W
7inch(180mm)
110V
50Hz
3,300W
-
Solex M200 is the premium water-soluble cutting lubricant made from the finely purified Paraffin Base Oil with an extreme pressured ingredients and compound additive.
It is the semi-synthetic emulsion type cutting lubricant made with extreme pressure complex additives for deep cutting process and precise machining, and the some special skin pates
-
- Powerful double insulated motor with dual speed
- 1.150watt.
-Improved magnetic holding power.
-Safety relay circuit
- Reset safety in case of power failure.
- Wuick and easy conversion freom twist drilling to cuttion with TruMag cutters
- MT2
-
Introduction
Size
AW, BW, NQ, NQ3, HQ, NW, HW
Usage
1) Drill rods
It is sustained by a chuck of a drill rig. It digs by using a core barrel and a bit at front. Its major function is to transport the rotation and pressure of a drilling machine to the bit, as well as delivering drilling water to the bit. They also cool the bit rapidly and
-
Introduction
PILE DRIVER (VIBRO HAMMER) TILTING TYPE - DPD350T, DPD600T
- Driving & Extracting Sheet pile, H-beam, Tube and steel plate
- Higher economical & maneuverability than that of crane attached pile driver.
- Excellent workability and double safety.
- 360 degrees rotation for easy operation & 90 degrees tilting clamp for
safety
-
Hoisting Plugs
it is used when Drill rods pull back or down.
Size : N, H,
available any
-
Solex SS-10 is the synthetic water-soluble type cutting lubrications. It contains special additives and developed for the heavy cutting process, and some special skin parts require luminous intensity.
Especially, it removes the existing disadvantage for viscosity and machining problem. It also has an advantage to use various processes by
-
Introduction
Tornado hammer customized Overburden Drilling System.
Same benefits as Tornado hammers- Easier to retract and no reverse rotation required
- Wings are retracted when Super Tornado is lifted
Super Tornado Hammer Specification
Model
No.of
Hammers
Combined Bit
Casing