-
The Regulator is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The Regulator is divided into GPR for low
-
Multicrystalline Si ingot for solar cell
Special Features
Silicon melting and ingot growing system for solar cell applications.
Lab scale of ingot growing (50kg/batch).
Highly efficient and rapid heating.
Automatic PC control system with user-friendly interface.
Specifications
Vacuum chamber : Chamber body : 880phi x 1,200H
-
SH-, SU-, SE- Series films are the transparent high gas-barrier films for food packaging. Nano-silica material is coated on base plastic films such as PET, OPP, OPA (Nylon), and hence the penetration of gases like oxygen or moisture is minimized. These SH-, SU and SE- Series high barrier film can be applicable to the food packaging, pharmaceutical
-
Heat sink Package
Solution : 2chip & 3 Chip
Optical Power : 0.8W~ 1.2W
External dimensions : 5.1 x 5.2 x 1.2T
? Features
? Large-sized Heat Sink Type
? Semi Power Solution
? Large-sized Heat Sink Package
??Heat Resistance Improvement
??High Reliability
? Middle Power
?? Excellent Optical Efficiency
-
Pls review the attached drawings.
SPECS OF MANUAL STAGE
Stage Surface
125*125mm ; F125
Stroke
Coarse:360 Fine:+-8
Resolution
28'
Load
-
The Regulator is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The Regulator is divided into GPR for low
-
-
Productivity of this machine is higher than existing ones by 80 percent with carbon dioxide emissions being reduced by almost 50 percent. Also, as carbon dioxide emissions that are produced during the welding process decrease by 45% thanks to reduced time of processing same amount of workload, 2.8 billion won of annual saving is expected with
-
This is a high speed match outer box making machine for producing outer boxes of cardboard from skillets. The process of making outer box is divided, skillet feeding, gluing, folding, pressing, forming and drying stages. Skillet feeder pick each one skillet from skillet magazine and pass between the forming bar with gluing. After gluing, skillets
-
Pls review attached drawing;
SPECS OF MANUAL STAGE
Stage Surface
60 * 60mm
Stroke
+-6.5mm
Travel Guide
Ball bearing
Resolution
10um/5um
Load
-
Pls review the attached drawing:
SPECS OF MANUAL STAGE
Stage Surface
125 * 125mm
Stroke
+-12.5mm
Travel Guide
Crossed Roller Bearing
Resolution
10um
Load Capacity
10kgf
Material
-
Introduction
Easy maintenance for heating roller.
Just 2 step could be remove rollers.
First, oper cove.
End, remove roller cover 2pcs.
Clean up or replace, No problem.
Electric heating coil roller
Uniform heat onductivity is not broken.
Long life-time.
Be simple is smart.
-
Model
High Voltage Detector
Use
High voltage electricity statement by detecting electronic circuit
Rating • 7.2 /12 /24 / 36 kV • With a flashing LED • No Battery
Example of application
• HV switchgear incoming side( parts)
• HV motor control center
• Transformer HV side
• High voltage Bus
-
Pls review the attached drawings.
SPECS OF MANUAL STAGE
Stage Surface
80 * 80mm
Stroke
+-12.5mm
Travel Guide
Crossed roller bearing
Resolution
10um
Load
-
Introduction
Inhaled water inside pump to be compressed by piston and to be used for cleaning and washing at high pressurized discharging water.
With small volume of water without chemical.
- High Pressure Cleaning Pump: 15 models
Rated Pressure range 100-200 kgf/cm2 Flow rate 11-50liter/min
- Fixed type Fire fighting Pumps 3
-
The Regulator is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The Regulator is divided into GPR for low
-
Metal etching, Silica etching, Polymer etching
Special Features
TCP etching system with 3 chambers for R&D and small scale production.
Automatic robot transporting system.
ESC (Electro Static Chuck) and He cooling system for silica etching.
Average throughput Up to 250,000 wafers per year.
Specifications
Wafer capacity : 1 ×
-
SH-, SU-, SE- Series films are the transparent high gas-barrier films for food packaging. Nano-silica material is coated on base plastic films such as PET, OPP, OPA (Nylon), and hence the penetration of gases like oxygen or moisture is minimized. These SH-, SU and SE- Series high barrier film can be applicable to the food packaging, pharmaceutical
-
General Package
Solution : 3chip & 4 Chip
Optical Power : Up to 0.3W
External dimensions : 4.5 x 4.5 x 1.9T
? Features
? Multi Chip up to 4
? High Efficiency
? Excellent Heat Emission
? 3 to 4 Chip Solution
?? 4 Chip mountable / High Efficiency of Middle Power Level
?? Excellent of Optical Efficiency & Heat Emission
-
Pls review attached drawings.
SPECS OF MANUAL STAGE
Stage Surface
80*80mm ; F80
Stroke
Coarse:360 Fine:+-8
Resolution
21'
Load