-
Full Face Masks Flame Resistance Tester is test when full face mask’s class 2,3 (follow up KIF’s standard) is exposed on the flame, check for either burn on the parts of full face mask or keep burn over 5 second after without
-
SH-5000 Single opening type sliding door is an automatic door suitable for entrances to federal buildings, unmanned guard systems for apartment building and automatic door to factories. It is designed to fully open in an emergency situation, such as fire, so that a large traffic of people being evacuated or a large-sized cargo can pass through the
-
FESTEC’s 3 Meter Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important to measure the smoke generation from the evalue of light source
-
Hot wire coil ignition tester measures the specimen’s ignition time during hot coil is heated electrically. After heating the specimen that flows electricity by rolling it with hot coil which produces 0.25 ~ 0.27W/? linear power density to 120 seconds, this equipment records the time it is
-
This surface of the material spread flame tester (ISO 9239, Flooring Radiant Panel Tester) is test method that formal reflected spread of flame on flooring material back-draft condition when fire on building happened flame at compartment or room adjacent, or high temperature gas radiated to flooring surface a hot radiation heat accumulated at
-
SH-5000 IAD is an industrial automatic door designed with improved productivity and wind-breaking effect that allows passage of fork lift and other vehicles. A large door for a factory or warehouse requires a high level of power. The system is designed to move a large and heavy door quietly and powerfully.
Features:SH-5000 IAD is an industrial
-
Cerawell well-being series, Laonzena series that prioritizes health.
The world’s first IH heat-resistant glazed ceramicware
The world’s premium heat-resistant ceramicware applied with low temperature glaze that does not contain any of the 4 major heavy metals that are harmful to human health
IH heat-resistance ceramicware takes a leap
-
This test method covers the determination of the lower and upper concentration limits of flammability of chemicals having sufficient vapor pressure to form flammable mixtures in air at atmospheric pressure at the test temperature. This test method may be used to determine these limits in the presence of inert dilution gases. No oxidant stronger
-
45 Degree is used to evaluate compliance of fire-retardant products with fireretardant performance standards according to the combustion method, and measures combustion characteristics such as After Glow and After Flame of test specimen installed at a 45-degree angle.
FESTEC 45°Flammability tests After Flame Time and After Glow Time of specimen
-
SH-5000 Double Door Type is suitable for entrances to banks, buildings with a large traffic of people, and those for service purposes, and is designed to provide a wider opening so that more people can move through the door.
Features:SH-5000 Double Door Type is suitable for entrances to banks, buildings with a large traffic of people, and those
-
[Product Information]
1. Article No : DS-926
2. Size of Article(mm) : 405x140x215
3. Material of Article : ABS(nontoxic material)
4. Package type : Cardboard open box
5. Description of Article : 1) Friction-powered gear system.
2) Engine sounds when running.
3) Ladder moves and turns 360°.
4) Kids enjoy loading tool box.
5)
-
HCF-NEK606 is an equipment that can decide whether power lines or control lines used in the coast, ships and refineries are resistant to high heat that may be caused by oil or
-
IMO is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 (Reaction to fire tests–Spread of flame- Part 2 Lateral spread on building
-
We are manufacturing window for marine accommodation.
We produce Not only normal window but electric heating window, fire window
Features
-Electric heated not influenced by weather and secures a clear view.
-In case of fire window, it is proof against fire for an hour
Spec
-A60 27T glass / A0 16T glass
Standard
ISO, JIS,
-
Introduction
- Used as filling material to produce the electric cables.
- Excellent for the cable trays and it is destructed promptly as the paper yarn is burnt to ashes quickly to prevent secondary
-
This equipment virtually simulates an external fire to evaluate the resistance of the roof and other physical elements of fire, in order to qualify for the flame spread experiments (A~C class), in case of A 1.82m, B 2.4m and C 3.9m. It is equipment to displacement of the testing material and the exposure and falling of the roof
-
Erosion Tracking Tester measures the resistance to tracking and erosion by using liquid pollutants and inclined plane specimens. This tester can be evaluated resistance to tracking and erosion of electrical insulation materials used under severe ambient conditions and has two kinds type test way which are constant tracking voltage and stepwise
-
We are manufacturing window for marine accommodation.
We produce Not only normal window but electric heating window, fire window
Features
-Electric heated not influenced by weather and secures a clear view.
-In case of fire window, it is proof against fire for an hour
Spac
-A60 27T glass / A0 16T
-
Introduction
The cloth is made of less inflammable polypropylene resin to be used for industrial packing going through the process of weaving, cutting, printing and
-
The Radiant Panel Flame Spread Tester is an equipment using gas ignited Radiant heat panel to test the surface combustibility of Building product (ASTM E 162) and cellular plastics (ASTM E 3675), Radiant Panel Index (Is) is measured by the flame radio-waves, Critical Heat Flux,(CHF) and Heat Release