-
It is a heat (radiant heat) flux tester of limited window or fire-retardant door to prevent spread of fire and to secure exit path near the window or fire-retardant door.
This tester is used to allow heat radiation test for supplementing fire protection test of windows in Grade A, Grade B, and Grade F compartment for ships specified in FTP Code
-
=Digital Pocket Dissolved Oxygen Tester DMT-50=
Finally it is available, a pocket dissolved oxygen tester, allowing fast and quick measurement of DO in any water source, great for aquaculture, aerobic bacteria respiration measurement, a must for
-
Slipring
The brush type slipring is an electrical parts transferring a power and some kinds of signals
without twist of wires between rotor and stator.
As using a precious metal brush,
the brush type slipring solve the problems which are occurring
in carbon type slipring like electrical noise, maintenance, life cycle and so
-
FESTEC’s IEC 60331-12 tester is used in test conditions where the basic flame temperature is at
least 830? and tests the cable exposed to flame and mechanical shock that needs to maintain
the circuit
-
Introduction
1. Easy to use and measure
2. Detect Total coliforms and E.coli in 24hous
3. Save the expense up to 20~50% than traditional methods
4. Easy to identify the presence/absence for total coliforms/e.coli
Features
Colitest is a most convenient product line for the determination of the presence or absence of either total coliforms
-
An equipment supporting various high-resolution pattern generators to test the LCD module’s speed and accuracy.
Spec:
Division
Description
Contract method
Basic user cable method (Pin Block application by model)
JIG Max Size
382mm x 468mm
M/C
M/C on LCM inner pot (adapter board + user
-
WCDMA ICS Repeater enhances BTS coverage for Small Office and Home Applications.
WCDMA ICS Repeater has followings key features ;
•Supports 2.1GHz WCDMA Band
•GSM 900/1800/1900, CDMA 450/800/1900, LTE 700/900/1800 Band also Available
•DL : 10 dBm, UL : 13 dBm Output
•Cancellation Range G=I+10 dB
•Built in Donor and Service
-
FESTEC’s Building Construction Fire Resistance Tester measures the performance of construction material against standard fire conditions, and satisfies the general requirements, vertical history section material, vertical non-history section material and the fire-proof door’s fire proof testing.@ This equipment tests about the walls, doors,
-
=Digital Pocket pH Tester DMT-30=
The pocket pH tester is an inexpensive tester with easy to operate and replaceable electrode.It is ideal for fish farm, environmental plants, industrial water processing and education
-
Slipring
The brush type slipring is an electrical parts transferring a power and some kinds of signals
without twist of wires between rotor and stator.
As using a precious metal brush,
the brush type slipring solve the problems which are occurring
in carbon type slipring like electrical noise, maintenance, life cycle and so
-
FESTEC’s IEC 60331-11 tester is used in test conditions where the basic flame temperature is at least 750? and tests the cable exposed to the flame that needs to maintain the circuit
-
Diarrhea prevention and immunity reinforcement in calf(veterinary drug)
Diarrhea of calves during the lactational period
1. Diarrhea takes up as many as 60% of all the calf diseases
2. 80~90% of all the diarrhea cases are caused by Rota, Corona, and E-coli viruses
3. Infection before the immune system becomes active results in lethal
-
An equipment to test functions of various LCD modules (STN, TFT, EL) and touch panel.
An exclusive compiler is provided when testing inspection sample in consideration of programs to satisfy conditions required during drive, H/W conditions and for other convenience.
It is built with a power supply capable of measuring six electric voltages and
-
NANO-AIS Hardware
*Non-destructive Tensile property evaluation for Nano scale material
*Laboratory type IIT system (Automatic test module)
*Piezo actuation system with Non-contact Capacitance sensor
*Jog Shuttle function for remote control and 3-Axis stage operation
*Temperature sensor
*Soundproof system(option)
*Isothermal-isohumidity
-
FESTEC’s Fire Resistance Assemblies Tester is included in both the IEEE 1202 and IEEE 383 standards. This test method is proceed in a chamber with a set volume for 20 minutes. During the 20 minutes, a sample cable is ignited with theoretically 20kW(70,000Btu/hr) flame using an ignition source fixed in a vertical position. This equipment
-
=Digital Pocket ORP Tester DMT-40=
The pocket ORP tester is an inexpensive pocket type tester which is simple to operate ideal for monitor ozone system, Aquarium & Aquaculture monitoring, Water purification & Drinking Water, Water pollution
-
Slipring
The brush type slipring is an electrical parts transferring a power and some kinds of signals
without twist of wires between rotor and stator.
As using a precious metal brush,
the brush type slipring solve the problems which are occurring
in carbon type slipring like electrical noise, maintenance, life cycle and so
-
FESTEC’s IEC 60754-1&2 Tester measures gas volume of Halogen Acid (IEC 60754-1), pH
concentration(PH Meter, Hydrogen ions, IEC 60754-2), Conductivity(IEC 60754-2) and etc from a
wire (cable) by radiant heat in the Tube Furnace (IEC 60754-1: 800°c, IEC 60754-2: 950°c)
Especially, FESTEC’s IEC 60754-1&2 is enable to test both IEC 60754-1
-
Introduction
The CRDi injector Testing & Cleaning /Piezo injector Testing.
Product Features.
1.Testing the uniformity of the common rail injector
2.Various brand name injectors (Bosch, Delphi, Denso) Testing.
3.Testing for injection figures.
4. can be fuel line cleaning & testing of Bosch/Delphi Injectors of all common rail diesel
-
MPG3000 tests various LCD modules (STN, TFT, EL) and touch panel functions.
An exclusive compiler is provided when testing inspection samples in consideration of programs to satisfy conditions required during drive, H/W conditions and for other convenience.
It is built with a power supply capable of measuring six electric voltages and