-
Tire Cutting Horn (20KHz, 40KHz) for Cutting to
-
Productivity of this machine is higher than existing ones by 80 percent with carbon dioxide emissions being reduced by almost 50 percent. Also, as carbon dioxide emissions that are produced during the welding process decrease by 45% thanks to reduced time of processing same amount of workload, 2.8 billion won of annual saving is expected with
-
NI-STRIP Horn (40KHz) for Angularity
-
1. It can weld lots of bolts and pins into workpiece in a very short time.
2. welding depth : 1mm to 10mm
3. Appropriate for welding into thin metal plate within 0.02 second.
4. No change on the other side of workpiece lie distortion, transformation, harm to painting & coating when work done.
5. Small & light studgun is convenient to
-
This is a device that controls and analyzes the quality of the welded section by measuring the current, voltage, and welding time using sensors upon arc welding. As a type of nondestructive inspection, it can perform total inspection in real-time, and carry out data formation of all inspection results.
Features:1. Optimized for real-time
-
Tire Cutting Horn (40KHz) for Cutting to
-
-
Introduction
For early fire action - Portable Aersol Type Fire Extinguisher
Anybody can use
-Easy & simple type! Everyone can use it easily
Spray Distance
-max 5m
-Children can use it
Echo-friendly
-Harmlessness for the human body
Handy,deposit,convenient
-It’s small spray type so it is convenient for deposit and
-
* Features
Capacy and usable rate
Possible full-using of 4.0 lengthy welding rod
Suitable for mechanics, canning, steel-structure workers
* Standard Specification
- Inverter D.C Arc Welding Power Source
Model
ECONO-230
Rated output current
A
10~200
Rated
-
-
Battery Horn & Nest(20KHz) for Battery
-
-
Through this device, reliable data can be secured with regard to WPS/PQR work that must be essentially prepared before performing welding in nuclear power, heavy industry, shipbuilding, chemical plant, etc. Furthermore, because automatic measurement is possible with this device, PQ work used to be done with a team of two personnel can now be
-
* Features
Compact and lightest
Conservation of energy
Various built-in protective functions
P.C.B. interior functions
- TIG ARC SPOT
- DOWN SLOPE
- CRATER
- PULSE SLECTION
- GAS AFTER FLOW
- TIG & MMA
- GAS CHEEK
- SELF COUNSELLING
Remote control can be used (optional)
Applied welding metal
- Nickel alloy
- Low-alloy
-
Universal expansion joint assemblies consist of two bellows connected by a center spool piece with flange or pipe ends. The universal arrangements allows greater axial, lateral and angular movements than a single bellows assembly.
Application: For possible subsidence of tanks, as well as for steam, hot water, oil and other pipelines where
-
Features: Universal expansion joint Welded type
Application: Steam, Air, Gases Water & Oils
Pressure: 10 Kgf/cm2 to 20
-
Submerged Arc Welding wire used to SAW machine. Automatic welding of metal parts, medium and big pressure containers of carbon steel, alloy steel and stainless