-
Productivity of this machine is higher than existing ones by 80 percent with carbon dioxide emissions being reduced by almost 50 percent. Also, as carbon dioxide emissions that are produced during the welding process decrease by 45% thanks to reduced time of processing same amount of workload, 2.8 billion won of annual saving is expected with
-
Various Anvil (20kHz, 40kHz) for Metal
-
Air Heater
Super Air Heater, Heating of door trim of cars. thermal setting (welding), Automatic soldering by
heating of wire conductor, heating of cosmetics.
Super Air Heater is required for each type of industrial process. Rapid heating is enabled with the
minimum size for spot heating (partial heating) by using the compressor air. This
-
This is a device that controls and analyzes the quality of the welded section by measuring the current, voltage, and welding time using sensors upon resistance welding. As a type of nondestructive inspection, it can perform total inspection in real-time, and carry out data formation of all inspection results.
Features:1. Built-in autosave,
-
[Resin Welding]
Transparent Acryl Welding
Welded acryl resin has good adhesive strength at high and low temperature from 60–20?, and remains transparent without bubbles in an environment with increasing-temperature, regardless of the humidity and temperature cycle. In addition, UV printing is available through graphics.
? 10
-
-
Anvil & Cutting Roller (40KHz) for Textile
-
Features
- Suitable for welding mild steel, stainless steel and aluminum by both AC and DC
TIG welding
- High buty cycle for welding aluminum by sufficient capacity of all parts
- All kinds of metal can be welding by DC TIG and AC TIG, Usable at any plant by easy to change
input voltage 220V, 380V, 440V
- Non contact arc starting by High
-
This is a device that controls and analyzes the quality of the welded section by measuring the current, voltage, welding time using sensors upon arc welding and resistance welding. As a type of nondestructive inspection, it can perform total inspection in real-time, and carry out data formation of all inspection results.
Features: 1. Optimized
-
[Resin Welding]
Transparent Acryl Welding
Welded acryl resin has good adhesive strength at high and low temperature from 60–20?, and remains transparent without bubbles in an environment with increasing-temperature, regardless of the humidity and temperature cycle. In addition, UV printing is available through graphics.
? 10
-
-
AIR BAG Horn & Anvil (40KHz) for Air Bag
-
Features
- Excellent Welding Capacity developed by Digital Circuit
- Usable at any plant buy easy to change input voltage
220V,380V,440V
- Non contact arc starting by High Frequency circuit
- Easy to verify welding current by digital ammeter during welding
- Optional remote controller is available for adjusting output current
without
-
This is a device that controls and analyzes the quality of the welded section by measuring the current, voltage, welding time using sensors upon arc welding and resistance welding. As a type of nondestructive inspection, it can perform total inspection in real-time, and carry out data formation of all inspection results.
Features:1. Optimized
-
[Resin Welding]
Transparent Acryl Welding
Welded acryl resin has good adhesive strength at high and low temperature from 60–20?, and remains transparent without bubbles in an environment with increasing-temperature, regardless of the humidity and temperature cycle. In addition, UV printing is available through graphics.
? 10
-
Introduction
World’s first patented product
In the past, gases, such as oxygen and LPG, were supplied for oxygen welding and cutting through two lines of hoses.
- Disadvantages of existing products (two-line hose)
1. The existing PVC hoses easily went flat because of sparks and at those times, hoses had to be cut and welding head parts
-
-
LIPB Horn (20KHZ, 1Wave) for Lithium Ion Polymer
-
Features
- This equipment allows beginners to do highly efficie welding with limited pracitice and
functions effectively by attachedautomated devices
- Without removal of slag and welding speed is improved significantly
- Due to rapid welding and improved efficiency by not having to remove slag and spatter, the
cost of welding.
-
-
This is a device that controls and analyzes the quality of the welded section by measuring the current, voltage, welding time using sensors upon arc welding and resistance welding. As a type of nondestructive inspection, it can perform total inspection in real-time, and carry out data formation of all inspection results.
Features:1. Optimized